VIDEOFIED SE250 2-Way Outdoor Siren

The Videofied Outdoor Siren/Strobe maximizes deterrence and helps responders to quickly locate the residence or facility at night. Totally wireless, it can be mounted easily anywhere. Multiple sirens can be placed on the same system.

Description
The Outdoor Siren/Strobe Model SE is a battery operated, wireless combination unit designed for use in Videofied security systems. The unit consists of a sounder, strobe light, and S2View Spread Spectrum, Videofied, interactive, encrypted wireless circuitry for secure two-way communication with the control panel. The siren produces an output level of 105 dB at 1 meter for 3 minutes, in alarm. The strobe light flashes
four times per second for three minutes, in alarm. The unit is typically installed outdoors on the structure to help responding authorities locate the alarm site. The unit should be mounted where it is protected from weather elements, at a height where intruders cannot reach to help prevent disabling the unit. A dual tamper function provides detection for both cover and mounting surface. The unit is powered by four alkaline batteries that can last four years, depending on the amount of siren/strobe activity. The unit transmits a check-in signal every eight minutes that includes its unique identification code, along with the tamper condition and battery status.

Features
- S2View - Spread Spectrum, Videofied, Interactive AES Encrypted Wireless technology provides optimum signal integrity and security.
- Sounder - provides outp ut of 105 dB at 1 meter for up to 3 minutes, in alarm.
- Supervised - transmits a check-in/status signal every 8 minutes indicating tamper state and battery status.
- Dual tamper - provides detection for both wall and cover tamper.
- Four 1.5v Dcell Alkaline Batteries = four years.
- Wireless technology provides optimum signal integrity and security
- Sounder providing output of 105dB at 1 meter up to 3 minutes, in alarm.
- Dual tamper

Applications
- Visual and audible annunciation of alarms in Videofied security systems.

Technical Specification

Electrical Data
Panel Compatibility XL, XLL, Visio, XT, XT-iP, XV, XV-iP, XTO
Power requirements Four 1.5 V Alkaline Batteries
Nominal Voltage 6V
Low Battery Limit 4.8V
Battery type Energizer Alkaline D cell - LR20
Battery life Up to 4 years
RF technology S2View
Radio type Spread Spectrum Bidirectional
Operating frequency 868 MHz
Transmission security AES encryption algorithm
Supervision Polled signal every 8 minutes
Antenna Integrated
Tamper detection Wall and cover tampered
Speaker impedance 4 ohms
Output level 105 dB at 1 meter
Output duration Configured in Control Panel
Flash type Strobe light tube
Flash duration Matches Programmed Siren Length
Flash sequence Four flashes/sec
Operating temperature -30 - +60 C
Maximum relative humidity 90%, non-condensing

Physical Data
Material ABS-ULV0
Dimensions (LxWxD) 227 mm x 166 mm x 80 mm
Weight 880 g (without batteries)

Installation/Mounting
Unit/Base Four screws secure unit to base; three screws secure unit base to mounting surface.

Certification & Approvals
CE
EN50131-Grade2
EN300220
INCERT
IDA
NCP