VIDEOFIED IMD200 2-Way Motion Detector
Availability: In Stock
Ex Tax: 66.39€
Add to Compare
Features
- SAFT LS14500 AA Lithium battery for long life.
- Standard coverage lens (12m distance)
- Dual tamper function provides detection for both wall and cover tamper.
- Transmits check-in/status signal every 8 minutes.
Technical Specifications
Properties
Panel Compatibility XL, XLL, Visio, XT, XT-iP, XV, XV-iP, XTO, XTO-iP
Power requirements
Type AA
Nominal Voltage 3.6v
Low battery limit 2.7v
Battery type SAFT, AA, Lithium, LS14500
Quantity 1
Battery life (estimated) Up to 4 years
Current Consumption
Max 37 mA
RF Technology S2View Bidirectional Radio
Central Frequency 868MHz
Radio type Spread Spectrum Bidirectional RF
Transmission security AES algorithm encryption
Supervision Panel polls devices every 8 minutes
Antenna Integrated
Tamper Wall and cover tamper
PIR Performance
Technology Passive infrared DSP
Type Dual element
Lens Fresnel
Detection Angle 90 degree
Detection Distance Up to 12m
Motion Detection pattern 24 facets
Environmental and Physical Properties
Operating temperature -10 - +40 C
Maximum relative humidity 75%, non-condensing
Material ABS - ULV0
Dimensions (LxWxD): 51.2 x 80.9 x 36.8mm
Weight 58 g (without battery)
Installation/Mounting
Mounting Height 2 to 2.3m
Mounting on Wall
On Flat Wall With 2 x Screws
In Corner With 2 x Screws
Closing of the Casing Closing by clip and screw if required by local legislation
Certifications & Standards
Standards EN60950-1:2006+/A11:2009+/A1:2010
EN300220-1 V2.4.1
EN300220-2 V2.4.1
NF EN50130-4:1995+/A1:1998+/A2:2003;
NF EN50130-5:1998 Classe II
NF EN50131-2-2:2009 - Grade 2
NF EN50131-5-3:2005 - Grade 2
NF EN50131-6:2008 Grade 2 ?Type C
Certifications Europe CE / EN50131 Grade2
Netherlands NCP