VIDEOFIED IDC200 2-Way Door/Window Contact

VIDEOFIED IDC200 2-Way Door/Window Contact
Product Code: VIDEOFIED IDC200 2-Way Door/Window Contact
Availability: In Stock
Price: 48.00€
Ex Tax: 40.34€
Qty:     - OR -   Add to Wish List
Add to Compare

- S2View - Spread Spectrum, Videofied, Interactive, AES Encrypted Wireless technology provides optimum signal integrity and security.
- Supervised - transmits a check-in/status signal every 8 minutesindicating open/closed state, tamper conditions, serial number, date of manufacture, software revision and battery status.
- Dual tamper - provides detection for both wall and cover tamper.
- Duracell CR123A Lithium battery - Up to four years.

- Doors
- Windows
- Cabinet doors/drawers
- Other similar openings
- Doors
- Windows
- Overhead garage doors
- Cabinet doors/drawers
- Other similar openings

Technical Specifications

Panel Compatibility XL, XLL, Visio, XT, XT-iP, XV, XV-iP, XTO, XTO-iP
Power Requirements
Nominal Voltage 3.0V
Low battery limit 2.7V
QTY and Battery Type One 3.0V Lithium battery
Battery type Duracell, CR123A
Battery life Up to 4 years

Current Consumption
Max 35mA
Axis of detection Three axis (X, Y, Z)
Opening Detection Distance 2.3cm
Closing Detection Distance 2.0cm

RF Technology S2View
Radio type Spread Spectrum Bidirectional RF
Central Frequency 868MHz
Transmission Security AES algorithm encryption
Supervision Polled signal every 8 minutes
Antenna Integrated
Tamper Wall and cover tamper

Physical data
Operating temperature -10 - +40 C
Maximum relative humidity 75%, non-condensing
Material Plastic: ABS-ULV0
Magnet Alnico 5
Dimensions LxWxD
Body 95 x 25.8 x 22mm
Spacer 64 x 15 x 10mm
Magnet 64 x 15 x 11mm
Weight: Detector 38g - without battery
Physical Protection IP31 and IK04

Certifications & Standards
Standards EN60950-1:2006+/A11:2009+/A1:2010
EN300220-1 V2.4.1
EN300220-2 V2.4.1
NF EN50130-4:1995+/A1:1998+/A2:2003;
NF EN50130-5:1998 Classe II
NF EN50131-2-6:2008 - Grade 2
NF EN50131-5-3:2005 - Grade 2
NF EN50131-6:2008 Grade 2 ?Type C
Certifications Europe CE / EN50131 Grado 2
Netherlands NCP

One screw secures cover to base; Two screws secure detector to mounting surface.